Morning Gents and Ladies
We have an issue with a sr3170 booklet finisher.When doing a corner staple job the paper doesn't go back far enough in to hit the staple unit,then spits the paper out not stapled and misaligned with each other,we have replaced the gathering roller and the plate the roller sits in as it was slightly bent also replaced the 2 smaller foam rollers with no Joy.
Any ideas are really appreciated, as the customer is getting a bit impatient.
Thanks in advance
The doc
We have an issue with a sr3170 booklet finisher.When doing a corner staple job the paper doesn't go back far enough in to hit the staple unit,then spits the paper out not stapled and misaligned with each other,we have replaced the gathering roller and the plate the roller sits in as it was slightly bent also replaced the 2 smaller foam rollers with no Joy.
Any ideas are really appreciated, as the customer is getting a bit impatient.
Thanks in advance
The doc
Comment