Has anyone had trouble with an error code sc572-02 on a mpc4502 ? It resets and runs for a day or so then pops again. I am going to replace the thermistor today and the sleeve unit is only 2 months old.
-
-
Re: bucmanjw
The service manual says to replace the pressure roller end thermistor. I say, to avoid having to go back again, and avoid an unhappy customer, replace the pressure roller thermostat also. -
Re: bucmanjw
I replaced the thermistor and over a week without a code. I guess i over thought the problem. Thanks for the help.Comment
Comment