mpc2551 duplex default

[peter@digitalswebsite.com]

Got a MP C2551 that is set to duplex as a default in copy mode, where can I change that

[PJF]

Re: mpc2551 duplex default

Not sure on that exact model, But i'm pretty sure it will be the same through the Ricoh MPCs. In copy change to all the settings you wish to have as default. So unselect Duplex. Then on the right there's a program button. In there you can program your current settings as Defaults.

[sandmanmac]

Re: mpc2551 duplex default

Not sure on that exact model, But i'm pretty sure it will be the same through the Ricoh MPCs. In copy change to all the settings you wish to have as default. So unselect Duplex. Then on the right there's a program button. In there you can program your current settings as Defaults.

Your'e right.
Respectfully...this is end user stuff, and very easy to find:

https://ricoh-kb-en.custhelp.com/app/answers/detail/region/us/brand/ricoh/a_id/154444/

[slimslob]

Re: mpc2551 duplex default

Not sure on that exact model, But i'm pretty sure it will be the same through the Ricoh MPCs. In copy change to all the settings you wish to have as default. So unselect Duplex. Then on the right there's a program button. In there you can program your current settings as Defaults.

Your'e right.
Respectfully...this is end user stuff, and very easy to find:
https://ricoh-kb-en.custhelp.com/app...h/a_id/154444/

This is normal new equipment setup procedure.