Removed internal finisher from a MP 3352...looking for an exit tray

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Foo
    Trusted Tech

    Site Contributor
    100+ Posts
    • Nov 2009
    • 199
    #1

    Removed internal finisher from a MP 3352...looking for an exit tray

    I have a customer that had me remove the internal fuser on their MP 3352.
    It had been a source of several service calls recently. I mentioned that I could just remove it.
    Now I have a open metal top cover above the laser assy. But the service calls stopped!
    The part number for the Exit tray is D120 1340.

    If you have one you'd be willing to part with or you know where I might be able to find one
    please post and let me know.

    Thanks for all the help you folks provide.

    Jeff in STL
    Tags: None
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: Removed internal finisher from a MP 3352...looking for an exit tray

      What was the fault the finisher was removed for?

      Spare part Ricoh D1201340, ORIGINAL | ARTONERY.com
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • Foo
          Trusted Tech

          Site Contributor
          100+ Posts
          • Nov 2009
          • 199
          #3
          Re: Removed internal finisher from a MP 3352...looking for an exit tray

          Originally posted by TonerMunkeh
          What was the fault the finisher was removed for?

          Spare part Ricoh D1201340, ORIGINAL | ARTONERY.com

          Sorry I don't remember. It was erroring shortly after the paper entered the finisher.
          There was a sensor on top of the finisher that I suspected was the issue.
          The customer was over it and told me to just remove it. So I did.

          The part you linked to above comes from Europe somewhere.
          I'd prefer to get it in the States if possible.

          Thanks for posting

          Jeff

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 37491
              #4
              Re: Removed internal finisher from a MP 3352...looking for an exit tray

              Originally posted by Foo
              Sorry I don't remember. It was erroring shortly after the paper entered the finisher.
              There was a sensor on top of the finisher that I suspected was the issue.
              The customer was over it and told me to just remove it. So I did.

              The part you linked to above comes from Europe somewhere.
              I'd prefer to get it in the States if possible.

              Thanks for posting

              Jeff
              The part number is valid in the States. It is the base only. You will also need D1201307 and D1201341. Order through your normal parts channel.

                Comment

                Previous template Next
                Working...