Fiery driven button only beeps

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • devontug
    Technician

    Site Contributor
    50+ Posts
    • Apr 2015
    • 99
    #1

    Fiery driven button only beeps

    My Ricoh mpc4000 comes with a fiery and has a button fiery driven and is to provide an additional option screen when pressed but all it does is beep twice with no action.

    Can someone tell me what's the possible causes?

    The fiery cycles to 00

    Help please

    Regards,
    DD
    Tags: None
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: Fiery driven button only beeps

      Excerpt from Fiery service manual attached. Make sure the right wires are in the right holes!

      f_e5100.pdf
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • devontug
          Technician

          Site Contributor
          50+ Posts
          • Apr 2015
          • 99
          #3
          Re: Fiery driven button only beeps

          Originally posted by TonerMunkeh
          Excerpt from Fiery service manual attached. Make sure the right wires are in the right holes!

          [ATTACH]34948[/ATTACH]
          I think it is attach properly .... On fiery top most usb connected to usb A on printer
          Top nic port has white crossover cable with filters on both ends to nic port the one that's not saying Ethernet

          Lower nic port in fiery connected to my pc

          Do I have that right?

          NB
          Is there a way to bypass fiery completely and use printer from Ethernet port??




          Sent from my iPhone using Tapatalk

            Comment

            • TonerMunkeh
              Professional Moron

              2,500+ Posts
              • Apr 2008
              • 3865
              #4
              Re: Fiery driven button only beeps

              No, the Fiery must be connected to the gigabit ethernet port on the 4000. USB won't work. Check the installation instructions I just posted.
              It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

              Hit it.

                Comment

                • Itanic
                  Technician

                  50+ Posts
                  • Dec 2014
                  • 59
                  #5
                  Re: Fiery driven button only beeps

                  I recently separated a Fiery from an MPC3000 (don't ask me why an MPC3000 had a Fiery but it did)...
                  I was told it couldn't be done but just followed the Fiery installation instructions in reverse and introduced the Fiery controller to the Bin.
                  That MPC3000 is now doing great on it's own! :-)

                    Comment

                    • devontug
                      Technician

                      Site Contributor
                      50+ Posts
                      • Apr 2015
                      • 99
                      #6
                      Re: Fiery driven button only beeps

                      Got it to work thanks for the all the help


                      Sent from my iPhone using Tapatalk

                        Comment

                        Previous template Next
                        Working...