Mp9000 dirty paper edge

[Codex]

Re: Mp9000 dirty paper edge

Thank you guys!
i cleaned out again averything, checked the pump, tubes and heat foil......changed the Transfer belt.....and for the moment the machine works fine...leet's see after christmas

Merry Christmas !!

[antoney suresh das]

Re: Mp9000 dirty paper edge

hi, there's nothing wrong with the developer, if you have not adjusted the doctor blade just follow these steps it will sure solve your problem.I did have the same problem
1. Clean the drum unit
2. Pull out the developer unit remove the gear in the lower half of the dev unit which adds toner from the hopper
3. Put the dev unit back and run copies till the copies become light.
4.Initialize the toner density sensor in service mode.
5.Put the gear back on the dev unit
run copies as usual try to run a 2 to 3 thousand copies pls let me know
good luck

[Codex]

Re: Mp9000 dirty paper edge

Thank you! I'll try this and let you know

Inviato dal mio SM-G935F utilizzando Tapatalk