MPC3503 Original detection

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GeorgeBest
    Senior Tech

    500+ Posts
    • Jul 2009
    • 517
    #1

    MPC3503 Original detection

    HI,

    Got a problem on detecting A4 originels on de the ADF.
    Cleaned and checked all sensors, seems to be allright.
    But however, it detect not always the right side (A4) (Mostley 8 1/2 x 11)

    Anyone more experienced here . . . see an original detection set on SP6016, but
    how and what does this SP mode works . ?

    Thanks in advance
    Tags: None
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: MPC3503 Original detection

      Check the original width and length detection sensors in input mode, they're a bit weak and one might have snuffed it.
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37057
          #3
          Re: MPC3503 Original detection

          I have had this with firmware and memory errors. Update firmware. If the system and engine do not need updating, reload them. Then clear IMH, Image Handling, memory.

            Comment

            Previous template Next
            Working...