MP C3003

[CrapAimer]

Hi

Could someone tel me how to save current address from one machine and put on another one ?

Much Appeciated

George

[Mark Bbb]

Re: MP C3003

I'm sorry, but I do not understand you.

[HDSB]

Re: MP C3003

Export the address book from the web image monitor, export to SD card, export using SDMA

[sparks45]

Re: MP C3003

On the WIM of the old device, login as admin, go to address book management, maintenance, create a back up and save to desktop. on new device, log into WIM as admin, address book manangement, maintenance, then restore backup. browse to your file you saved and import

[Mark Bbb]

Re: MP C3003

So, you mean to copy the user addresses to another Ricoh machine
ooh...
I thought perhaps you mean the ip address...

I'm not so strong in communicating well, you see...

[mikadonovan]

Re: MP C3003

Export the address book from the web image monitor, export to SD card, export using SDMA

I used to do this.

On the WIM of the old device, login as admin, go to address book management, maintenance, create a back up and save to desktop. on new device, log into WIM as admin, address book manangement, maintenance, then restore backup. browse to your file you saved and import

Now I do this, it's easier and less time consuming. You just have to remember to save it to someones desktop BEFORE you load the old machine into the truck

[CrapAimer]

Re: MP C3003

Some smart arse has changed the Admin pasword etc, was trying to back up using the USB port but the machine cant see the stick, its as if it needs to be switched on ?, looked through the settings cant see anything relating to it. Got an old MP C300 here and it works ok with that.

George

[Mark Bbb]

Re: MP C3003

Some smart arse has changed the Admin pasword etc, was trying to back up using the USB port but the machine cant see the stick, its as if it needs to be switched on ?, looked through the settings cant see anything relating to it. Got an old MP C300 here and it works ok with that.

George

Which machine can't see the stick: The computer, the Ricoh,...?
Can you please make your sentences readable?

[sparks45]

Re: MP C3003

Prohibit storage device use will be enabled in admin tools via user tools. you need to login as admin to change that though. try login in as supervisor to reset the admininstrator password

[slimslob]

Re: MP C3003

Some smart arse has changed the Admin pasword etc, was trying to back up using the USB port but the machine cant see the stick, its as if it needs to be switched on ?, looked through the settings cant see anything relating to it. Got an old MP C300 here and it works ok with that.

George

Address backup from SP mode uses the same SD card slot that is used for firmware updates.

As for Admin password, you can logging as supervisor to change admin password.