SP5210SR no counter

[tufbnme]

When I go into user tools to check the counter, it is not there. I have searched the manual to see if it can be not shown but came up empty. Anyone ever see this?

[apump]

Re: SP5210SR no counter

[QUOTE=tufbnme;552145]When I go into user tools to check the counter, it is not there. I have searched the manual to see if it can be not shown but came up empty. Anyone ever see this?[/

SP5930-001 Meter Click Charge set to a 1

[tufbnme]

Re: SP5210SR no counter

Never seen that, didn't know what that SP was for. THANK YOU

[COPIERMAN]

Re: SP5210SR no counter

Never seen that, didn't know what that SP was for. THANK YOU

means service mode then 5 and the 930 set to 1

[tufbnme]

Re: SP5210SR no counter

means service mode then 5 and the 930 set to 1

I know what and how to set an SP, I meant I did not know that the SP mentioned would hide the counter.

[slimslob]

Re: SP5210SR no counter

I know what and how to set an SP, I meant I did not know that the SP mentioned would hide the counter.

The counter is hidden by default. The SP allows the tech to turn the counter display on.

[Polarbear]

Re: SP5210SR no counter

Ricoh designed it so that if the machine is sold to the user without a contract, then the meter is pointless.

That is why you would only need to switch it on when there is a contract in place and meter counts matter.