C6502 - Machine indicates cover open but does not show which cover

[Stormhammer]

As the subject states, the machine has some sort of false open cover state. The machine was operational when I first approached it and I managed to check the door switches which all seem to work. It seems to me that when I opened the drawer and started poking around the fuser is what tripped it into that state again. Firmware level is good. Perhaps it is an electrical fault?

[semi]

Re: C6502 - Machine indicates cover open but does not show which cover

Check the D2 Blue lever handle,sensor next to that.

[Stormhammer]

Re: C6502 - Machine indicates cover open but does not show which cover

That was precisely what it was. I missed the tech bulletin on this it seems.

[waleed]

Re: C6502 - Machine indicates cover open but does not show which cover

ricoh 1075 cover is open as shown message but all the doors are closed

[davel]

Re: C6502 - Machine indicates cover open but does not show which cover

Again, new thread.