error SC 819

**PCC.TONER** · 03-30-2017, 08:44 AM

Re: error SC 819

Originally posted by Joelcalatayud

Hello friends of the forum
Maybe someone has the firmware of the ricoh mp 6002 in spanish please
Thank you
Why I have an error sc 819 I have already changed hard disk and does not release the code friends help

Toner chip, Copier parts, Toner Cartridge - einmay toner

**slimslob** · 03-30-2017, 06:43 PM

Re: error SC 819

Originally posted by Joelcalatayud

Maybe someone has the firmware of the ricoh mp 6002 in spanish please

There is only one language firmware. When you install it, you have to select the language required.

**imaginemoko** · 03-30-2017, 09:29 PM

Re: error SC 819

try resetting your controller board, memory first, cleaned if its dusty. worst case casualties could be nvram or controller board.

**service_man** · 04-08-2017, 07:17 PM

Re: error SC 819

Did you try to change another HDD??

Try to rotate memory in slot.

Try to change FW.

Change Printer Control Board

**davel** · 07-24-2018, 03:38 AM

Re: error SC 819

Old thread but you need a trained technician with access to firmware to do it for you.

**Phil B.** · 07-24-2018, 03:20 PM

Re: error SC 819

Originally posted by Bebboo

How can I replace controller firmware? many thanks.

with that question you asked it is CLEAR you are not a trained technician. You will not have access to the firmware and frankly if you don't know the proper procedure ... you can really screw da pooch.

bottom line...

hire a trained tech .

**sandmanmac** · 07-25-2018, 05:31 AM

Re: error SC 819

Originally posted by Phil B.

with that question you asked it is CLEAR you are not a trained technician. You will not have access to the firmware and frankly if you don't know the proper procedure ... you can really screw da pooch.

bottom line...

hire a trained tech .

..and it's his 2nd hijacked thread for the same issue - with 2 month gap in between mind you