Have some toner at the backside of the laser glass. There are some holes looking like cleaning holes, but no device to go inside. Will be appriciated if somebody could advice me how to clean the laser glasses on this printer. Thanks in advance.
-
-
Re: SPC 430 How to clean the laser beam path
Hi there!
Sorry, but the best way is to pull out the whole unit & clean it.
Greetings... -
Re: SPC 430 How to clean the laser beam path
Pull out all the PCUs and you can access the laser glass underneath. Pinky finger wrapped in a Stretch-n-Dust usually does the trick. If not, you can grab your can of compressed air, aim the straw towards the back, and try a tiny puff.
The laser unit is a huge pain to get out of this machine...Comment
Comment