aficio 1018d

[Gab]

i aw testing machine and worked fine. Sudenly during testing sc541 appeared . I checked lamp, thermistor and thermostat and look ok. Is there anything else or do i have to see peower sullpy (i checked fuses on PW and they are ok).
I know it is an old machine but the use is very little.

[Cipher]

Re: aficio 1018d

Check the contact thermistor.

Could be faulty or have toner build up on it.

[duplicators]

Re: aficio 1018d

i aw testing machine and worked fine. Sudenly during testing sc541 appeared . I checked lamp, thermistor and thermostat and look ok. Is there anything else or do i have to see peower sullpy (i checked fuses on PW and they are ok).
I know it is an old machine but the use is very little.

Check continuity on all wires


Enviado desde mi XT1064 mediante Tapatalk

[bob marley]

Re: aficio 1018d

sc 541

Possible Cause
1- Fusing thermistor defective or disconnected
2- Fusing lamp defective
3- Fuse blown
4- PSU defective
5- Bad connection between fuser and machine