[Misc] Ricoh Pro906EX stuck during work and "copying" displayed

[Codex]

Hello Guys
I have a strange problem with an pRO906, the machine stuck DURING work (Print or copy), after approx. 5 or 6 sheets, sometimes more, the machine stops working, the motors remains on and the fuser also rotates....and that's it...no paper coming out anymore, if I open the machine I find the sheet right under the registry sensor...it seems the machine is waiting for some input.....on the display "copying" or "printing" is displayed....
Thanks for your help

[zed255]

Re: Ricoh Pro906EX stuck during work and "copying" displayed

If you wait long enough does any SC pop up? Seen it a few times where something goes wrong but the machine takes a very long time to actually error out.

You can also format the INH area ofvthe HDD. Seen bad temporary data lingering on the disc cause wierd issues.

[Codex]

Re: Ricoh Pro906EX stuck during work and "copying" displayed

Hello... I had a similar problem with the old 2090...in that case after 5 minutes sc990 pops up... I remember that the cause was a small gear in the paper feed assy.... But in the Pro906 it's different... I've formatted the hdd twice... Still same problem... Firmware are up to date

Inviato dal mio SM-G935F utilizzando Tapatalk

[Imprestik]

Re: Ricoh Pro906EX stuck during work and "copying" displayed

Its your fusing unit, lamps are on their way out and not heating up correctly

[Codex]

Re: Ricoh Pro906EX stuck during work and "copying" displayed

Without any sc code?

Inviato dal mio SM-G935F utilizzando Tapatalk