Nashuatec Pro 8120 : Replacement Required:Fusing Unit:Cleaning Unit

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • romnick
    Technician

    50+ Posts
    • Aug 2008
    • 56
    #1

    Nashuatec Pro 8120 : Replacement Required:Fusing Unit:Cleaning Unit

    Gentlemen: The Fusing unit Still Looks Good But There Is A Message That Need To Replace, Can I Reset The Counter Without Replacing It, Please Answer Me, Thank You !
    Tags: None
    • davel
      Technician

      1,000+ Posts
      • Oct 2011
      • 1089
      #2
      Re: Nashuatec Pro 8120 : Replacement Required:Fusing Unit:Cleaning Unit

      I would guess that the cleaning unit needs replacing, normal preventative maintenance.

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37056
          #3
          Re: Nashuatec Pro 8120 : Replacement Required:Fusing Unit:Cleaning Unit

          Either the fusing unit cleaning unit has reached the PM count or the cleaning web has ran completely out.

            Comment

            • romnick
              Technician

              50+ Posts
              • Aug 2008
              • 56
              #4
              Re: Nashuatec Pro 8120 : Replacement Required:Fusing Unit:Cleaning Unit

              How to reset the counter of this cleaning unit

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 37056
                  #5
                  Re: Nashuatec Pro 8120 : Replacement Required:Fusing Unit:Cleaning Unit

                  PM counters are reset in SP mode and must be done with the doors open. For the Cleaning Unit it would be SP 7622-038.

                    Comment

                    Previous template Next
                    Working...