SP MODE ON MP 501

[CRISTIAN MULLER]

Hello guys and girl (Debbie), I'm installing a new MP 501 with the new Smart panel, I don't know how to enter in SP MODE in this new PANEL, they had no keys, Can anyone help me with this?. thanks a lot.

[barratec]

Re: SP MODE ON MP 501

hi!
To enter in SP mode you have 2 ways:

-launch the copier app and digit on the keyboard that is displayed the same service code of new ricoh controller(reset, 8,0,6,1,8.........)

-on the left side of the panel there's a little white cover, open it; touch "check status" on the panel with the third lower button under the cover you opened before , together. In this way will appear on the panel a touch keyboard to input service code.

I attach to this message the SOP service manual maybe you need it.

[CRISTIAN MULLER]

Re: SP MODE ON MP 501

hi!
To enter in SP mode you have 2 ways:

-launch the copier app and digit on the keyboard that is displayed the same service code of new ricoh controller(reset, 8,0,6,1,8.........)

-on the left side of the panel there's a little white cover, open it; touch "check status" on the panel with the third lower button under the cover you opened before , together. In this way will appear on the panel a touch keyboard to input service code.

I attach to this message the SOP service manual maybe you need it.

That is it, thank you so much, if you came to Brazil let me know and I buy you a drink.

[barratec]

Re: SP MODE ON MP 501

That is it, thank you so much, if you came to Brazil let me know and I buy you a drink.

I hope to go in Brazil soon. Bye!

[Polarbear]

Re: SP MODE ON MP 501

I hope to go in Brazil soon. Bye!

Just look out for Vin Diesel....