If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Pro, where do I print out the factory sp settings for mpc3500? Appreciate much ur help
Sent from my Mi 4i using Tapatalk
There should be a "birth certificate", probably inside the front door. If there isn't, you're screwed, although you haven't specified which SP settings you're after. You could print off the non-default data, that would give you some information but not all of it.
Additionally, you may get some information via RTFM mode and check the ID ten T data.
Comment