Ricoh MP 305+SPF toner empty issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aktasson
    Trusted Tech

    100+ Posts
    • Feb 2017
    • 201

    #1

    Ricoh MP 305+SPF toner empty issue

    Hi there!

    I have for tomorow an onsite service order for a ricoh mp 305+spf. The order comes from a another service partner.
    The customer complains low toner/toner empty on the machine. The machine is out of service because of the toner message.

    The toner changed by customer two times with a new one without positiv effect. Has anyone a specific knowledge or a tip for this model mp305+spf?

    The ricoh support db and tier2 does not provide any information.

    Thanks in advance.
  • solorajder
    Trusted Tech
    • Jul 2010
    • 106

    #2
    Re: Ricoh MP 305+SPF toner empty issue

    Worn gear at pcu unit. Replace a pcu unit.

    Sent from my GT-I9195I using Tapatalk

    Comment

    • aktasson
      Trusted Tech

      100+ Posts
      • Feb 2017
      • 201

      #3
      Re: Ricoh MP 305+SPF toner empty issue

      That was funny Ok, the cause was found. The sp forgot to remove the installation mylar from the pcdu. Problem solved.

      Comment

      • aktasson
        Trusted Tech

        100+ Posts
        • Feb 2017
        • 201

        #4
        Re: Ricoh MP 305+SPF toner empty issue

        Customer has called back after 3 weeks. The toner empty issue is back but with another cause. The toner bottle does not spin. With output check in sp to the toner bottle motor, the bottle does not move from the spot. Without installed bottle non of the gears does not move.

        I ordered DC MOTOR:TONE R SUPPLY:ASS'Y D2053346 and HOLDER:TONER SUPPLY:ASS'Y D2053310.

        Does somebody still have another idea?

        Comment

        • LANUN_81
          Technician
          • Jan 2017
          • 12

          #5
          Re: Ricoh MP 305+SPF toner empty issue

          if toner not detect plz change the BRB board D1175162

          Comment

          • aktasson
            Trusted Tech

            100+ Posts
            • Feb 2017
            • 201

            #6
            Re: Ricoh MP 305+SPF toner empty issue

            Originally posted by LANUN_81
            if toner not detect plz change the BRB board D1175162
            Hello my friend, it's not a mp c305, but a mp 305+ I'll be at the customer tomorrow and install the parts. Wish me good luck

            Comment

            • kannuki2
              Trusted Tech
              250+ Posts
              • Feb 2012
              • 398

              #7
              Re: Ricoh MP 305+SPF toner empty issue

              Mp305 is prolly based on the mp301. I'd try the pcu + toner hopper first.

              Comment

              • aktasson
                Trusted Tech

                100+ Posts
                • Feb 2017
                • 201

                #8
                Re: Ricoh MP 305+SPF toner empty issue

                Originally posted by kannuki2
                Mp305 is prolly based on the mp301. I'd try the pcu + toner hopper first.
                Not really, it's different. But I've found the problem. It's the worm gear of toner supply that is broken. And exactly this gear is not part of the hole toner supply ass'y
                Attached Files

                Comment

                • ShonRipz
                  Technician
                  • May 2017
                  • 33

                  #9
                  Re: Ricoh MP 305+SPF toner empty issue

                  Having the same issue with yellow on a mp c305. Says toner not detected. I'm lead to believe replacing D1175162 BRB corrects thisnissue? How are these toner hoppers different from the old toner pumps? Fairly reliable toner hoppers?

                  Comment

                  • ShonRipz
                    Technician
                    • May 2017
                    • 33

                    #10
                    Re: Ricoh MP 305+SPF toner empty issue

                    Originally posted by LANUN_81
                    if toner not detect plz change the BRB board D1175162
                    This is what I've gathered so far. I wonder if removing the board and manually rebending the pins would work?

                    Comment

                    • Athlontini
                      Trusted Tech

                      250+ Posts
                      • Jun 2012
                      • 269

                      #11
                      Re: Ricoh MP 305+SPF toner empty issue

                      Originally posted by ShonRipz
                      Having the same issue with yellow on a mp c305. Says toner not detected. I'm lead to believe replacing D1175162 BRB corrects thisnissue? How are these toner hoppers different from the old toner pumps? Fairly reliable toner hoppers?
                      For the MP C305 there is a bulletin for this issue. It lists a handful of different causes, including broken toner hopper, the toner bottle housing, and the PCDU being installed incorrectly.

                      Comment

                      Working...