If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Going on call tomorrow for MPC2551 with error sc681-08
Re: Going on call tomorrow for MPC2551 with error sc681-08
SC 681-061 thru 164 is retry of RFID communication fails three times after the machine has detected the RFID communication error. The number after the 08 identifies the color. 081 BK, 082 M, 083 C and 084 Y. Defective chip on cartridge, defective RFID board, damaged/loose RFID board cable, electrical noise. Cartridge is the quickest and easiest to try first.
Re: Going on call tomorrow for MPC2551 with error sc681-08
Originally posted by axyun
have call tomorrow on Ricoh MPC2551 with SC681-08.. Is this more likely a toner cartridge issue or reader /board ? Frank/Action Photocopy
Any info related to this is very much appreciated.
I had a series of this issue on various toner cartridge colors. our parts/supplies dept. had decided to save a buck by using non-OEM toner. The copiers couldn't read the RFID chips accurately causing a few headaches in the shop. Confirm toner cartridges are OEM!
Comment