ricoh aficio 2018
I have an af 2018 with a skew. machine does not skew in test mode, but skews from the glass and when using the adf. is there any adjustment for a skew. please help!
-
-
Most of the time I see skew from the glass on any of the Ricoh copiers that have the 'hanging' scanner bed where the front left side of the scan bed is unsupported is due to the scanner frame being bent down.
What I do is lift up on the front left corner of the scanner (Yes, I'm bending or tweaking the frame) with varying degrees of force. Usually, it takes very little to tweak the frame so don't over-do it. Make frequent test copies to check results. -
the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
-
Saw your and others post in that thread. Glad to see that I wasn't the only one bending my machines.
Great minds think alike.....and I seem to be in good company.
Comment
-
I figure, if they bent it to break it, you can un-bend it to fix it, right? I didn't see the date the first time around, must have been a duplicate post to start out with.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
Comment