>>> MPC 2051 <<<< image error lead and trail edge on on copy

[spaceman99]

hi

hope someone may of seenn this before. it an old Ricoh MPC 2051ad.

Test prints from SP mode = all ok
print = ok from Driver
photo.jpg
Fault: see image attached

When copy off ADF ( slit Glass ) and off main glass i get smear lead and trailing edge.
Does not appear to be any fault with Glass or optics.

if you have any ideas i would be gratfull ,

thank you in advance.

[Elmo]

Re: &gt;&gt;&gt; MPC 2051 &lt;&lt;&lt;&lt; image error lead and trail edge on on copy

Check one of the mirrors has not come out of position the spring clips at the end can be out of position
also check the ccd area for any foreign objects fluff etc