MPC3002 internal fooling fan is active.

[Voltageza]

Hi

I have a MPC3002 that will give a message in the bottom left corner of the screen "Internal cooling fan is active" when i switch the machine off. This will be displayed even when the machine has not been used for a while.

The machine also have intermittent fuser problems, so i was wondering if this message is not maybe related.

Thanks guys

[Zeldaman]

Re: MPC3002 internal fooling fan is active.

Hi there!
The message is OK, has nothing to do with the fuser. For this, change or rebuild fuser and make a complete fw-update.
Greetings...

[Voltageza]

Re: MPC3002 internal fooling fan is active.

Hi there!
The message is OK, has nothing to do with the fuser. For this, change or rebuild fuser and make a complete fw-update.
Greetings...

Hi. OK

Firmware is up-to-date. Complete fuser has been replaced. Still getting unfused areas. Areas repeats are usually 95mm apart.

[Zeldaman]

[Voltageza]

Re: MPC3002 internal fooling fan is active.

Hi

complete new unit

[TonerMunkeh]

Re: MPC3002 internal fooling fan is active.

There's a modified exit motor for stupid fusing issues like this.