MP / MP C Touch screens

[zyqwiz]

What models does the H3109900 fit?

MPC4500 etc is B2239900
MPC5000 etc is D0299900

[Brave Hart]

The H310-9900 is for the B/W machines .
I have replaced very few MPC4500 Touch panels. mostly MP range.

[knightfall]

Hi Guys, I had a touch screen that nothing would responded so I pulled the touch screen connetor out an saw that the foil connector was dented in so I flatten the dent and put tape backing on the mylar that was changed on the tech bulletin and guess what it works. So my thinking is that there is nothing wrong with the touch panel itself just the mylar behind the foil connector that does not support the constant pressure from contacts on the foil connector. This might save a few bucks for the ones who have to pay for the touch panel, in the USA Ricoh has a no charge replacement so it doesn't cost us anything.

[zyqwiz]

The H310-9900 is for the B/W machines.

I managed to find it in the end - 3035/3045/MP3500/MP4500. There is a different part number for the MP4000/MP5000 but I can't see how it is any different to the MPC4500 or MPC5000 touch panel.

[Rano]

Are D029-9900 and B223-9900 the same? D029-9900 fits nice to MP C2500.

[Koosie]

Are D029-9900 and B223-9900 the same? D029-9900 fits nice to MP C2500.

B223-9900 is for the MPC2500. I have no clue what the diffrence is.

[Voltage]

We in South Africa get them for free. Think they said the program will run till 2011 or something

[texasatm12]

I have a touch screen

October is touch screen month! We seem to have had a run of touchscreens on the MP / MPC range go out of adjustment. Some of them have gone so far out you couldn't get into the calibration mode to adjust them back in and had to replace the screen.

Anybody else noticed and problems?

I have a B2239900 touch screen if you need one . mark texasatm12

[spatel86]

Help!

Hey there people!

I am in Hertfordshire and I have a MP C3000 that the screen has gone out on. I believe the part number I need is B2231484, does anyone have any of these available and if so can someone hook me on price please? Also, any help on install would be much appreciated! Thanks in advance.

Sam

[spatel86]

Hey there,

I noticed you are in Watford and I am in Herts also! I am looking for some help with a screen on an MP C3000 that has gone out and needed some other input/help on making some adjustments etc. I believe I need the B2231484, any idea on how much I can get my hands on one of those for? Can you help me out? It would be much appreciated. Thanks in advance!

Sam