[Error Code] SC672 Controller start up error

[myaroka]

• After the machine is powered on, the communication between the controller and the operation panel is not established, or communication with controller is interrupted after a normal startup.
• After startup reset of the operation panel, the attention code (FDH) or the attention acknowledge code (FEH) is not sent from the controller within 30 seconds.
• After the controller issues a command to check the communication line with the controller at 30 second intervals, the controller fails to respond twice.

[slimslob]

Re: SC672 Controller start up error

What model machine?

[myaroka]

Re: SC672 Controller start up error

SP5210SF