Ricoh 1045 jam problems

[Guest]

I have problems with my 1045. It allways jams at paper exit just about when i will be able to see paper. I had allready refurbished fusing unit (hot roller, press. roller, thermistor, bearing), changed paper exit sensor, twice, as well as fusing clutch and i still cant make a SINGLE copy. I took out selonoid and inspect them and culndn't find nothing wierd.

P.S. I also swaped BICU board from another 1045 and still aint working.

[scully]

Is the Paper Tray set on the correct size ?
Just a thought !
John
Uk

[tomazp]

Yes it is !

[bonnie750]

there are two rollers at the paper exit, visible when the finisher is removed. They get out of position and cause exit jams

[claudioterrible]

1045 jam

hi change the exit sensor fusing unit (you can see it in the page 55 pc manual) this sensor use to fuck sometimes

[banginbishop]

have you printed out the smc printout i.e. 5-9904 (logging data)?
what does it say? have you checked input mode 5-803 for the sensors?

[E Winter]

check the exact jam code

the fuser exit sensor is indeed a problem every now and then - it's located on the side cover above the transfer unit

[b003ace]

[hodgiepodgie]

what about inverter solenoids sticking. will give fuser exit jams.