If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Tim, try to rebuild the fuser's pressure bearings, pressure roller. I had this issue three times this month and I pm the fusing unit and able to resolve the error code.
Tim, try to rebuild the fuser's pressure bearings, pressure roller. I had this issue three times this month and I pm the fusing unit and able to resolve the error code.
+1 for this.
We ALWAYS replace the sleeve and pressure roller as a set these days.
Never just the sleeve on it's own.
Comment