Lanier MP CW2200 Wide Format

[88hawkfan]

Can anybody give me an idea of what is wrong with this plotter? 20180618161713466.pdfIt acts like something wrong in the memory but I have swapped memory to no avail.

[slimslob]

Re: Lanier MP CW2200 Wide Format

I would say one of the CIS segments.

[88hawkfan]

Re: Lanier MP CW2200 Wide Format

The machine is a color ink jet plotter and these are all prints. Normally I would say the problem is the print head, but the prints look like an actual word being strung along rather than ink being smeared.

[StephenB]

Re: Lanier MP CW2200 Wide Format

Agree, CIS Segment

[mikadonovan]

Re: Lanier MP CW2200 Wide Format

hạt giống hoa xác pháo

Dịch vụ Google maps - 0934225077:... | Protected by DMCA Protection

Get lost, spammer. NOBODY wants you here.

[88hawkfan]

Re: Lanier MP CW2200 Wide Format

I'm not saying you guys are wrong, just curious how a CIS would impact a print? No issues when customer does scan to email.

[slimslob]

Re: Lanier MP CW2200 Wide Format

I'm not saying you guys are wrong, just curious how a CIS would impact a print? No issues when customer does scan to email.

Where does it say printing? That type of distortion normally happens during scanning.

[Phil B.]

Re: Lanier MP CW2200 Wide Format

hạt giống hoa xác pháo

Dịch vụ Google maps - 0934225077:... | Protected by DMCA Protection

STOP THE G.D. SPAMMING !

[88hawkfan]

Re: Lanier MP CW2200 Wide Format

These are prints from a desktop, the streaks also occur when I run an SMC. Tried to scan an image of what it looks like on the SMC but it won't load on the forum page.

[Gary Bowen]

Re: Lanier MP CW2200 Wide Format

Have you tried running your "Check Nozzle Pattern" and verify those results. Your sample looks like a compressed image in areas but it is odd your machine does not throw a code/error. I would try cleaning the Horizontal Shaft that the Print Heads travel on. Also, you may want to replace the Encoder Strip. How old is this machine? Does it have the newer style bearings on the Print Head and the Paper Feed? The old bearings developed cracks.

[Polarbear]

Re: Lanier MP CW2200 Wide Format

Hi

have you tried printing from a different source, like a laptop with direct x-over cable to printer?

sometimes corrupt printer drivers, network issues like electrical interference, etc, can play havoc with our machines....

Try to isolate if the issue is on the machine or from outside.

[davel]

Re: Lanier MP CW2200 Wide Format

I think he has done that when he states that the SMC does it.

[Polarbear]

Re: Lanier MP CW2200 Wide Format

These are prints from a desktop, the streaks also occur when I run an SMC. Tried to scan an image of what it looks like on the SMC but it won't load on the forum page.

Only saw this now. My bad.

Sent from my SM-G950F using Tapatalk

[88hawkfan]

Re: Lanier MP CW2200 Wide Format

Thank you for all the input guys, encode strip and bearings have been replaced. The black print head was replaced earlier this year. Going to double check these things and see what I come up with. I'll keep you guys updated.

[MitchD]

Re: Lanier MP CW2200 Wide Format

Thank you for all the input guys, encode strip and bearings have been replaced. The black print head was replaced earlier this year. Going to double check these things and see what I come up with. I'll keep you guys updated.

Just curious....... Any update?