[Error Code] Sc446-51 ricoh c651ex

[VNshrine]

i am experiencing a ricoh 651ex error sc446 i have replaced the whole belt cluster but not exhausted. Look forward to the help of everyone. thank you


Sent from my iPhone using Tapatalk

[VNshrine]

Re: Sc446-51 ricoh c651ex

Help me


Sent from my iPhone using Tapatalk

[Phil B.]

Re: Sc446-51 ricoh c651ex

i am experiencing a ricoh 651ex error sc446 i have replaced the whole belt cluster but not exhausted. Look forward to the help of everyone. thank you


Sent from my iPhone using Tapatalk

did you clear the error code in Service Mode?

[VNshrine]

Re: Sc446-51 ricoh c651ex

did you clear the error code in Service Mode?

Can you tell me what the clear code


Sent from my iPhone using Tapatalk

[Phil B.]

Re: Sc446-51 ricoh c651ex

Can you tell me what the clear code


Sent from my iPhone using Tapatalk

take out your manual.... READ THE MANUAL!

don't expect people to do your research for you.

[blazebusiness]

Re: Sc446-51 ricoh c651ex

i am experiencing a ricoh 651ex error sc446 i have replaced the whole belt cluster but not exhausted. Look forward to the help of everyone. thank you


Sent from my iPhone using Tapatalk

Did you clean the ITB speed sensors?
In SP mode You can also initialize the sensors and even adjust the light output from the encoder.

What prompted you to replace the ITB?
Did you have the code before replacing the ITB or after?
See attached pdf:
SC446 after new ITB.pdf

[VNshrine]

Re: Sc446-51 ricoh c651ex

What prompted you to replace the ITB?
Did you have the code before replacing the ITB or after?
See attached pdf:
[ATTACH]40293[/ATTACH]

I replaced ITB from another machine that is working normally but not


Sent from my iPhone using Tapatalk

[blazebusiness]

Re: Sc446-51 ricoh c651ex

I replaced ITB from another machine that is working normally but not


Sent from my iPhone using Tapatalk

Then maybe it's the motor or transfer encoders