D193/MPC 401sr Creasing from tray 2

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • aficio63
    Technician
    • Jun 2014
    • 35
    #1

    [Jamming] D193/MPC 401sr Creasing from tray 2

    This machine has intermittent creasing when feeding from tray 2. It looks like the lead edge is "nicking" something prior to entering the fuser unit. Most of the time when it does this the paper makes it through but obviously creases. I have inspected all the guides in the paper path, pulled the feed unit out and inspected, replaced torque limiter/rollers in the unit. This only happens from tray 2??
    Any suggestions would be great.
    Tags: creasing, inspected, nicking, tray, unit
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 35064
      #2
      Re: D193/MPC 401sr Creasing from tray 2

      Check the tray 2 drawer guides.

        Comment

        • Phil B.
          Field Supervisor

          10,000+ Posts
          • Jul 2016
          • 22808
          #3
          Re: D193/MPC 401sr Creasing from tray 2

          agree with Slim...

          also did you pull the fuser and check inlet plate?

          now many pages on unit?
          maintenance done?

          is there toner IN the crease or is it toner free? Toner IN before fuser ...no toner in crease? before drum/image process

          shit sorry went bck and read.. yeah Slim has it right

            Comment

            Previous template Next
            Working...