SC 682-131,sc682-211 and sc 620-01 on a ricoh mpc2800

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fshead
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2356

    SC 682-131,sc682-211 and sc 620-01 on a ricoh mpc2800

    ok
    I just returned from a mpc2800 that would have sc682-131 show up at odd times.
    Before heading out I pulled a used mpc2800 drum.dev unit"i thought it was black" but i marked
    it wrong and it was magenta unit when unwrapped it at this account...
    I pulled all drums and ITB unit and cleaned and wiped etc etc.
    ANd on power on i got a sc620-01 and repower sc682-211 and then sc682-131.
    BEFORE i start swapping boards out and will return with a black drum.dev unit.
    Anything else???
    thanks
  • Zeldaman
    Senior Tech

    500+ Posts
    • Mar 2011
    • 946

    #2
    Re: SC 682-131,sc682-211 and sc 620-01 on a ricoh mpc2800

    Hi there!
    The 620-001 code is a problem with the ARDF, the other is a pcdu-problem. The reason for both can be a defective BICU. But the 2800 is an older model it can be a worn-out cable at the ARDF.
    Install correct pcdu & unplug the ARDF. If you have a BICU i would carry it to the customer too.
    Greetings...

    Comment

    • fshead
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2356

      #3
      Re: SC 682-131,sc682-211 and sc 620-01 on a ricoh mpc2800

      thanks,
      I plan on bringing black pcu abd BICU..
      Didnt know why the 131 and 211 code after the 682..

      Comment

      • fshead
        Service Manager

        1,000+ Posts
        • Jan 2009
        • 2356

        #4
        Re: SC 682-131,sc682-211 and sc 620-01 on a ricoh mpc2800

        hi
        i swapped a know good used c2800 black drum/dev unit after a thorough vacuuming of toner cartridge area and cleaning all drum
        interior connectors etc. and all is well..
        Might be time to upgrade next big call

        Comment

        • Mark Bbb
          Service Manager

          1,000+ Posts
          • Jun 2012
          • 1662

          #5
          Re: SC 682-131,sc682-211 and sc 620-01 on a ricoh mpc2800

          the connector of a color pcu is different from a black pcu.
          You are lucky you did not brake the connector receiver:
          replacing this is not easy and very much time needed!

          Comment

          • fshead
            Service Manager

            1,000+ Posts
            • Jan 2009
            • 2356

            #6
            Re: SC 682-131,sc682-211 and sc 620-01 on a ricoh mpc2800

            Originally posted by Mark Bbb
            the connector of a color pcu is different from a black pcu.
            You are lucky you did not brake the connector receiver:
            replacing this is not easy and very much time needed!
            I never tried to install the color unit in where the black pcu goes.
            i know the difference,and saw it before anything happened.

            Comment

            Working...