Hello,
i have a MPC 306 who cames with the Problem of totaly not printing the Cyan Color.
I changed
- all PCDU `s
- cleaned the ID Sensors
- changed the BCU temporarly
- changed two two laser Units within ( from left to the right and from right to the left )
- i checked the HV Board
After changing the Laser and adj the MUSIC the Cyan Color is back on the Chart,but to do the calibaration,only the copy-mode
works.
In printing Mode the Sheets are printed in the wrong direction.....( watch Picture )
Calibration is not Possible.
I also upgradet the FW,JAVA and Cheetah FW.
Any Ideas ?'
Thanks
ROger
i have a MPC 306 who cames with the Problem of totaly not printing the Cyan Color.
I changed
- all PCDU `s
- cleaned the ID Sensors
- changed the BCU temporarly
- changed two two laser Units within ( from left to the right and from right to the left )
- i checked the HV Board
After changing the Laser and adj the MUSIC the Cyan Color is back on the Chart,but to do the calibaration,only the copy-mode
works.
In printing Mode the Sheets are printed in the wrong direction.....( watch Picture )
Calibration is not Possible.
I also upgradet the FW,JAVA and Cheetah FW.
Any Ideas ?'
Thanks
ROger
Comment