If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a Ricoh Pro C5100s that is skewing from all trays and any media in the main scan direction. I am not finding any documentation showing how to adjust for this. Thanks in advance for any ideas.
I have a Ricoh Pro C5100s that is skewing from all trays and any media in the main scan direction. I am not finding any documentation showing how to adjust for this. Thanks in advance for any ideas.
Is this on prints or scans or both? If both i would look at the reg area if it is doing it from all trays from prints.
Networking skills are advantageous but use of a 3m vacuum cleaner is essential
Comment