2045 e

[hodgiepodgie]

z fold out of trays 1,2,3,4.cleaned all feed clutches and replcd ppf feed board

[mikadonovan]

Depending o where the z_fold is at, you may have to replace the relay and/or registration clutch.

[hodgiepodgie]

it is before the reg roller .funny have two machines down with exact same problem.will try replace cluthes."happiness is a warm gun".

[petrus]

try to adjust on sp-1003 (registration buckle adjustment)it some time the relay clutch delay to stop which force the paper over feed and its folded before the regist roller.

[hodgiepodgie]

It was( relay clutch) must have put dedective one in