After installing a new nvram and a B659 scanner/printer kit, the procedure recommends setting sp5907 (plug and play model name). It says that after selecting the right model to press the "original type" and # key at the same time to enter the setting. There IS no "original type" key on the control panel. Am I missing something or just being friggin stupid? Any ideas?
-
NEVER ASSUME ANYTHING -
I don't have the instructions in front of me, but I'm pretty sure you just select the corresponding model and then press the # key to make the change. You can verify the change by printing out 5 990 005, which should be the non default data.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed. -
It looks like the machine accepted the setting. ThanksNEVER ASSUME ANYTHINGComment
-
You're welcome, glad to help.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
Comment