E-44B Fiery connected to Proc5200s

[Batman1976]

Hi Guys,

I have a ProC5200s with a E44B Fiery Connected. The fiery keeps locking up, "Loading" on display and fiery icon disappears.

Have carried out all fiery system updates, loaded latest Patches and updated machine firmware to latest levels. ANyone seen or had this before?

Cheers

Batman1976

[DFM914]

Re: E-44B Fiery connected to Proc5200s

You may want to consider re-imaging the Fiery. I have seen this several times with a Fiery.

[Batman1976]

Re: E-44B Fiery connected to Proc5200s

You may want to consider re-imaging the Fiery. I have seen this several times with a Fiery.

Hi,

I have reloaded Fiery system software and device was fine for a while, now it has started hanging again "Please Wait" on display. I'm thinking eeither HDD or Motherboard??

[DFM914]

Re: E-44B Fiery connected to Proc5200s

I would attempt the hard drive first as I have seen these fail. Be sure to have the appropriate Fiery patches loaded as well.

[skinnyb]

Re: E-44B Fiery connected to Proc5200s

I would attempt the hard drive first as I have seen these fail. Be sure to have the appropriate Fiery patches loaded as well.

Yes. Any time I have to reload the software I usually change the drive to be safe. It's too much of a pain to load and do all the patches more than once if it craps again.

Sent from my LM-V405 using Tapatalk