SOP V Service Mode

[mikadonovan]

Hi All, hope your day is going well. I am working on a C6004 ex and would like to get into the SOP service mode. The manual is a little shortcoming these days with that kind of info. I can enter the recovery mode OK, but according to the manual there should be a service mode too and I'm hoping one of you kind souls will provide the procedure for me. PM me if you don't want to post. Thanks, Mika.

[zed255]

Re: SOP V Service Mode

SOP Service Mode

Access numeric keypad via:
EX3 and Check Status
Reset, 8, 0, 6, 1, 8, 2, #, #, Clear (press and hold)

You get this when you do the SOPv2 training...