Ricoh MPC401 SR Need SP mode enter info

[Arkynsaw]

I got the service manuals from Service-docs , but the information to enter the service mode is not in the manual , everything else is there , not surprising , I may have the info somewhere , but going out tomorrow to install a PCU black , need to reset the counter for it . Is it the same as others , Clear/Stop 1,0,7 , Hold start for 5 seconds or so ? Thanks in advance , Ark .

[davel]

Re: Ricoh MPC401 SR Need SP mode enter info

Google

[Arkynsaw]

Re: Ricoh MPC401 SR Need SP mode enter info

Yep , I did , Googled , no definite answer for this particular model , but likely what I said , except , stop at the end , not start .

[slimslob]

Re: Ricoh MPC401 SR Need SP mode enter info

More than likely the same as MP C3503, unless someone has changed it.