"switching display...please wait" error copy mode MPC4504EX

[djremixer]

Hello
)
when I use the new copy mode and the fast copy mode I get "switching display.....please wait" after 2 seconds (and it stays
The old copy mode works.

allready done:

- new firmware
- delete copy mode and fast copy mode en re-install the apps
- reset cheetah (android) afterwards install "animations" back
- replace tablet (complete!)

none of above works.

ordered new controller

regards

switching display.jpg

[davel]

Re: "switching display...please wait" error copy mode MPC4504EX

Stick with the classic apps.

[djremixer]

Re: "switching display...please wait" error copy mode MPC4504EX

Stick with the classic apps.

sorry Davel

this is not a sollution but a work arround...
and this is not a work arround for this client of 300 machines with streamline.....
classic app don't work with streamline

[skinnyb]

Re: "switching display...please wait" error copy mode MPC4504EX

First thing I would do is update all firmware on machine, Java and the Android OS. When I have seen this in the past it has always been a firmware/android mismatch.

Sent from my LM-V405 using Tapatalk

[djremixer]

Re: "switching display...please wait" error copy mode MPC4504EX

First thing I would do is update all firmware on machine, Java and the Android OS. When I have seen this in the past it has always been a firmware/android mismatch.

Sent from my LM-V405 using Tapatalk

allready done, read first post

[skinnyb]

Re: "switching display...please wait" error copy mode MPC4504EX

allready done, read first post

You said 'reset cheetah android ". Nothing about updating version. Print SP 5990-5 and see what version System 2a is. That's the Android version. You can reset the panel but not update.

Sent from my LM-V405 using Tapatalk

[djremixer]

Re: "switching display...please wait" error copy mode MPC4504EX

You said 'reset cheetah android ". Nothing about updating version. Print SP 5990-5 and see what version System 2a is. That's the Android version. You can reset the panel but not update.

Sent from my LM-V405 using Tapatalk

I said update firmware: cheetah is included in the package firmware!
and I also wrote that I changed a complete SOP. android isn't running on a CTL!

[skinnyb]

Re: "switching display...please wait" error copy mode MPC4504EX

I said update firmware: cheetah is included in the package firmware!
and I also wrote that I changed a complete SOP. android isn't running on a CTL!

Ah never done that. I am old school. I do SOP with zip file in SOP recovery mode. And machine firmware individual. Have had way too many issues with package firmware. Most current System M2a (Android) is 1.36. Might want to verify and make sure it took with the package. Also if Streamline is Java app, I would max out the heap and stack settings. If they are left at default, sometimes there isn't enough buffer and it will cause a lockup/crash.

Sent from my LM-V405 using Tapatalk

[KenB]

Re: "switching display...please wait" error copy mode MPC4504EX

Stick with the classic apps.

This in NOT an answer.

[KenB]