ricoh aficio 1035 display says "wait"

[javier4065]

[Wishbone]

Unplug the hard drive and turn the machine on and see if you get a green print key, I bet you do.

[scoobysteve]

do as wishbone mentioned. hdd could be faulty.

[Jomama46]

Heres another vote for HD

[Shadow1]

...and annother vote for the HDD, but I also had a loose MBU in the fax option cause this, assuming it has a fax option

[javier4065]

[gregoriojc]

try to reload the engine firmware, it looks like booting problem.

[mik84]

Had the same problem with Aficio 2035 and solution was one of connectors in power supply unit. But if you don't touch this unit it's rather unlikely to happen. I would try reload firmware firstly.

[javier4065]

ricoh aficio 1035 display says wait

where I find the engine firmware ,and how do I do this? Is the first time that I'll do this.thanks

[Guest]

where I find the engine firmware ,and how do I do this? Is the first time that I'll do this.thanks

Try at the " Tessa-support" web site, but you may need to have
an account. This kind of older product only work with a PCMCIA memory
card, and a special software to load it + PCMCIA connector on your
computer. Put the card in the service connector on the controler,it's
bootable and you just may follow the instructions .

[javier4065]

ricoh aficio 1035 display says wait

you have the reason,I unplugged the hard disk and the copier is work now.I want to know ,how many gigas should the hard disk have?How should I format the hdd.?thanks.

[Jomama46]

any off the shelf, 20G ATA drive will do. No formatting necessary. Jumper as master.