Ricoh MP C3003 sc101-01 when copying from glass

[slimslob]

Re: Ricoh MP C3003 sc101-01 when copying from glass

What happens when you do Auto Color Calibration?

[fshead]

Re: Ricoh MP C3003 sc101-01 when copying from glass

I believe it is in the proper position,black strip on top and to the left.
I made a lot of copies using the DF with no problem but almost every time from the platen glass it throws the code.

just cked my shop 03 and yes black top to the left so to the next possibility..what is used via glass vs adf?
did you try scanning to glass? different density setting,light,dark,?

[mga]

Re: Ricoh MP C3003 sc101-01 when copying from glass

I believe it is in the proper position,black strip on top and to the left.
I made a lot of copies using the DF with no problem but almost every time from the platen glass it throws the code.

Sounds like harness as only happens with carriage moves

[copyaction]

Re: Ricoh MP C3003 sc101-01 when copying from glass

did someone put the slit glass in backwards?
I did when prepping a machine and got the sc 101 code..
felt like a moron

I believe it is in the proper position,black strip on top and to the left.
I made a lot of copies using the DF with no problem but almost every time from the platen glass it throws the code.

[fshead]

Re: Ricoh MP C3003 sc101-01 when copying from glass

TRust me I was happy to see that was the issue rather than some funky board or other issue

[ABS tect]

Re: Ricoh MP C3003 sc101-01 when copying from glass

did someone put the slit glass in backwards?
I did when prepping a machine and got the sc 101 code..
felt like a moron

I second this...had one of my trainees do this and made him stare at the glass until he figured out what was wrong....black strip was underneath instead of on top....haha he'll never make that mistake again.

[fshead]

Re: Ricoh MP C3003 sc101-01 when copying from glass

did someone put the slit glass in backwards?
I did when prepping a machine and got the sc 101 code..
felt like a moron

[copyaction]

Re: Ricoh MP C3003 sc101-01 when copying from glass

Harness and cable part numbers are found on the Point to Point.

Looking at the point to point is it possibly D1495201

[slimslob]

Re: Ricoh MP C3003 sc101-01 when copying from glass

Harness and cable part numbers are found on the Point to Point.

[copyaction]