If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
im a toshiba tech independent one of my customers ended up with this 4510
it popped an sc544-00 I tried to buy the book on manualslib.com but looking at the preview it doesnt say how to get in and navigate sp mode looks very complicated
i need to get into sp mode to reset the error and im thinking a new fuser section will solve the problem even though the book says it could also be one of 3 boards im guessing the most common fix is the fuser
any help in getting in and doing reset would be great otherwise I will have to refer them to a ricoh dealer and maybe lose my customer
I cant afford to lose them please help
thanks
bruce
Enter SP mode, go into SP5-810-001, press
[Execute], and turn the main power switch off and on.
To enter in SP mode check the following link : YouTube
Comment