Ricom MP C4503 email counter report

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • COPIERMAN
    Senior Tech

    500+ Posts
    • Jun 2009
    • 553
    #1

    Ricom MP C4503 email counter report

    Hello everyone . The MP C3503 i go to 5-866 and set everything up and it works. I was setting up the MPC4503 and found that settings are not there. I got latest firmware that i know of and try again same thing information not there. Is it possble that ricoh never update this setting 5-866.
    thanks for any information on this.
    Tags: 5-866, firmware, information, setting
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 35066
      #2
      Re: Ricom MP C4503 email counter report

      May have been moved by a firmware update to Factory SP like they have with other useful SP modes.

        Comment

        • COPIERMAN
          Senior Tech

          500+ Posts
          • Jun 2009
          • 553
          #3
          Re: Ricom MP C4503 email counter report

          Originally posted by slimslob
          May have been moved by a firmware update to Factory SP like they have with other useful SP modes.
          Ok will check on next visit

            Comment

            • Brianneoe
              Trusted Tech

              250+ Posts
              • May 2015
              • 317
              #4
              Re: Ricom MP C4503 email counter report

              I have ran into this and a full firmware update always gave me the option. Re-check the firmware. I looked into the firmware read-me file and there's no mention of SP5-866 BTW. Go figure

                Comment

                Previous template Next
                Working...