SR 3170 Stapler Harness

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikadonovan
    Senior Tech

    Site Contributor
    2,500+ Posts
    • May 2008
    • 2936
    #1

    SR 3170 Stapler Harness

    Hi, All. I have a malfunctioning stapler on this booklet finisher (it staples, but it always says"add staples"). Tried 2 different staples carts that are fine in another 3170. Sooo, I need to get another stapler and harness for it. The stapler P/N I found, but I am having trouble locating the stapler harness P/N in the parts catalog. Am I blind, or just looking in the wrong place?
    Never mind, I found the issue was only with the saddle staples, Reseating the carts a couple times cleared the indication. Everyone have a good week.
    NEVER ASSUME ANYTHING
    Tags: harness, stapler, staples
    • sandmanmac
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Feb 2009
      • 3947
      #2
      Re: SR 3170 Stapler Harness

      Haha.....Excellent Mika!
      I love it!
      The issue. The troubleshooting. AND the solution all wrapped into one post!

        Comment

        • Polo-022
          Trusted Tech

          250+ Posts
          • Sep 2007
          • 479
          #3
          Re: SR 3170 Stapler Harness

          So did i, i could not find a part number for any harness, anywhere in the parts list : SR-3170, SR-3150

            Comment

            • mga
              Copier Technician

              Site Contributor
              1,000+ Posts
              • Dec 2010
              • 1393
              #4
              Re: SR 3170 Stapler Harness

              Part number for harness would be in the point to point diagram
              Regards Mark

              FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

              RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

              https://copierservices.simdif.com

                Comment

                • mikadonovan
                  Senior Tech

                  Site Contributor
                  2,500+ Posts
                  • May 2008
                  • 2936
                  #5
                  Re: SR 3170 Stapler Harness

                  Originally posted by mga
                  Part number for harness would be in the point to point diagram
                  I'm glad I don't need it then. A P-P for this would be hard for me to find. I wonder why in the world would they put any part numbers on a P-P instead of the parts catalog where all the other parts are located? Kinda defies logic.
                  NEVER ASSUME ANYTHING

                    Comment

                    • mga
                      Copier Technician

                      Site Contributor
                      1,000+ Posts
                      • Dec 2010
                      • 1393
                      #6
                      Re: SR 3170 Stapler Harness

                      Originally posted by mikadonovan
                      I'm glad I don't need it then. A P-P for this would be hard for me to find. I wonder why in the world would they put any part numbers on a P-P instead of the parts catalog where all the other parts are located? Kinda defies logic.
                      Silly I know that's ricoh
                      Regards Mark

                      FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                      RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                      https://copierservices.simdif.com

                        Comment

                        • slimslob
                          Retired

                          Site Contributor
                          25,000+ Posts
                          • May 2013
                          • 35057
                          #7
                          Re: SR 3170 Stapler Harness

                          Originally posted by mikadonovan
                          I'm glad I don't need it then. A P-P for this would be hard for me to find. I wonder why in the world would they put any part numbers on a P-P instead of the parts catalog where all the other parts are located? Kinda defies logic.
                          A few new model releases ago they decided to put the part numbers of the cables in the P-P instead of the parts catalog. A pain to use.

                            Comment

                            Previous template Next
                            Working...