Ricoh mp c5503

[heath03]

hello All:

i am getting a code SC 549-04. i ran 5000 on it yesterday on a 20# stock no problems. i was running a 24# stock this am and its throwing the code, i changes stock back to 20# and its not coding on us.
any ideas, ty for the help as always

[mga]

Re: Ricoh mp c5503

hello All:

i am getting a code SC 549-04. i ran 5000 on it yesterday on a 20# stock no problems. i was running a 24# stock this am and its throwing the code, i changes stock back to 20# and its not coding on us.
any ideas, ty for the help as always

Its a fuser shield error there's a little flag on front of fuser make sure is moving ok with gear at other end also clean sensors where flag actuator passes

[ABS tect]

Re: Ricoh mp c5503

24lb would put you into the middle thick setting i believe...did you change your paper tray settings when running it on 24lb?

[heath03]

Re: Ricoh mp c5503

24lb would put you into the middle thick setting i believe...did you change your paper tray settings when running it on 24lb?

yes, i did change that