Ricoh MP C8003 Fuser Heat Roller

[Oze]

Re: Ricoh MP C8003 Fuser Heat Roller

I was not asking for you guys to figure out why these are failing, all I wanted to know is if anyone was seeing this and if there are any other options rather than buying the whole heat roller assembly. I would not be on here asking if I had not been through the parts manual including the 3d parts. You can get every part to rebuild the heat roller besides the outer sleeve, I was just wondering if there is any way to get just that part.

Buy the belt and rebuild it CORRECTLY.
You can get out of it reasonably cheaply if you do the rebuild correctly.
We don't buy the entire Hot roller assy...and in the 3d parts guide for my region even though it's named "Hot Roller assy...it's just the roller.