mp 2000l not printing

[kishore_bulli]

Hello,
I have a problem with MP-2000L printer - it doesn't work on any port - i Tried USB and LAN. I tried every driver I could get from ricoh site - pcl6, pcl5e... When I try to print something there is no information, no error but it doesn't print... Maybe you could help me to analyse where the problem is?
I should add that the printer is almost new and it wasn't ever well configured - it didn't print yet.
Thanks in advance

[KopyKat]

Are you using the DDST driver? That is the driver you should be using for the "L" model.

Another possibility is the PCL 6 for DDST has not been activated at the factory.

Check [User Tools] / [Printer Features] / [List/Test Print] if [Configuration Page] is not shown as a selection, install PCL for DDST Firmware B8955500 version 0.45 or higher

[category_five]

double check that nic and usb is turned on in SP mode, I think it's under "Device Setting" towards the bottom of the 5's.

[iMind]