Spanner Screw Driver

[keithxxiii]

Fellas,

I might be on the wrong place but I am almost giving up on searching for the part number of the spanner screw driver which is issued by ricoh. I have been searching from the special tools section of the known models but unfurtunate to find.
If someone could provide the part number, I would greatly appreciate it.

Thanks in advance

[billm]

I LIKE THESE I HAVE FOUND CHEAPER ON THE INTERNET BUT THEY DID NOT LAST OR THE MAGNET WAS WEAK

Genuine Wiha 34152 Magnetic Nut Driver, 5.5 mm

https://www.precisionroller.com/34152-for-wiha/details_pn_80323.html

[keithxxiii]

The ones issued by Ricoh has an orange handle. And looks more sturdy than the ones in the pic

[lavind]

Cheaper here https://www.digikey.com/en/products/...YaAplTEALw_wcB

[slimslob]

For Ricoh-USA, many year ago you could get the tool order number from your instructor when you went to an instructor led training course.

[thebillydangerous]

Wiha is the most common 5.5mm nut driver I find on the net.
I tried em and they're okay, but they wear quickly and the magnets are inconsistent.

Now I have used this Atrix for a couple years and I'm happy enough to rebuy it once the head on this one gets stripped out a bit more.

https://atrix.com/product/magnetic-nut-driver/

[emiliorsg]

I have been using the Wiha screwdriver for years and it has not lost its magnetism or worn out much. I bought it at Katun, here in Spain, I think.

[TonerMunkeh]

https://www.longs.co.uk/acatalog/Magnetic-Nut-Spinner---Driver-HTNSMG.html