receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

[Mark Bbb]

Hello,
Is the receiving tray ass'y for the mpc3004 = D2414497 ?
I know that the M0AJ4497 is just the tray without any extra's on it...
I have now access to Octopussy but i can't find this info in the parts cat.
Do you know where to find it?
Thanks again!

[Sashko]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

You can fine the exit tray by p/n M0AJ4497 in the latest version of 3D PC, see picture.M0AJ4497.jpg

[Mark Bbb]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

D2414499 receiving tray spring
D2414494 “ “ up – down cap
Meanwhile i have found these parts, but there is still one missing.
It's the part marked with the red arrow. Thanks!
receive tray mpc3004.jpg

[DRichard]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

[ATTACH=CONFIG]51758[/ATTACH]

Look near the end of Parts Manual in the Accessories section ... D2414472 (END FENCE:TRAY:EXIT:ASS'Y)

[Mark Bbb]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

Look near the end of Parts Manual in the Accessories section ... D2414472 (END FENCE:TRAY:EXIT:ASS'Y)

Thanks, but why do they put it in the Accessories section? Probably just to make it easy for us, not?

[slimslob]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

Thanks, but why do they put it in the Accessories section? Probably just to make it easy for us, not?

Is the receiving tray assembly the thing that you have to remove in order to install a bridge unit or internal finisher? If so why do you throw it away? If you kept them you would have the part you need.

[DRichard]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

Is the receiving tray assembly the thing that you have to remove in order to install a bridge unit or internal finisher? If so why do you throw it away? If you kept them you would have the part you need.

That's what we do ...with several parts.

[DRichard]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

Thanks, but why do they put it in the Accessories section? Probably just to make it easy for us, not?

I agree, it doesn't make much sense. BTW, it is package separately along with a couple of decals and other small pieces you need when setting the machine up.

[DRichard]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

Thanks, but why do they put it in the Accessories section? Probably just to make it easy for us, not?

Ours is not to reason "Why?". Ours is but to do ..or die...

[copyaction]

Re: receiving tray ass'y for copy (or printed) paper - parts number request mpc3004

That's what we do ...with several parts.

If you have any of those spares for sale I am in need of one.