IMC W2200 Roll Feeder connection

[DRichard]

I am assembling our first IM Series version of this one. I have set up a few of the MP version of this one but don't recall this issue.
When connecting the harness to the BICU, I have two connectors that appear to be meant to plug into one plug designated CN254. Is this correct? The photos/description/point-point information has been of no help clarifying this. Anyone out there have first-hand experience that might shed some light?

[DRichard]

Re: IMC W2200 Roll Feeder connection

I am assembling our first IM Series version of this one. I have set up a few of the MP version of this one but don't recall this issue.
When connecting the harness to the BICU, I have two connectors that appear to be meant to plug into one plug designated CN254. Is this correct? The photos/description/point-point information has been of no help clarifying this. Anyone out there have first-hand experience that might shed some light?

Dilemma may be solved. After consulting with Ricoh tech support and sending some photos for review, we think the "two" plugs I have are actually ONE that is missing the collar/bridge that would normally connect them together. He nor I have ever seen this but the two separate plugs do indeed fit into the one connection on the IOB...(yes, I realize I had the wrong board description). I am now back in the shop and intend to move forward with completing the set up while keeping my fingers crossed.