If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Sounds like something the previous dealer had setup like @Remote and did not get it removed on al of them.I believe the SP mode Update actually uses the @remote server, but if the machine is configured to use a RCG, Remote Communication Gate, it will error if the RCG is not found. Check the setting of SP 5816-021 and 062.
I think the same. Those machines would be connected to @remote and the configuration was not deleted.
Comment